Kellys E-Bike Instrucciones De Uso página 3

EBIKE
Dear Customer,
Thank you for choosing a Kellys e-bike. To make sure you are happy with your e-bike and it is safe to
use, please read these instructions. It will help you get acquainted with your e-bike.
IMPORTANT NOTES ON THE INSTRUCTION MANUAL
These instructions are intended for end users.
Keep the manual so that it is accessible to all users of the battery and pass it on to the next owner.
The dealer who sold you the e-bike will also provide warranty inspections and repairs of your e-bike.
This manual or the separately enclosed battery manufacturer's manual contains important safety and
operating instructions for the use of batteries and battery chargers.
For your safety, please read this instruction manual thoroughly before use and follow it for proper use.
WHAT IS AN E-BIKE
An e-bike is a bicycle with an integrated electric drive system that assists in pedalling. Compared
to a conventional bicycle, you ride much more comfortably and effortlessly. The KELLYS e-bike uses
a SHIMANO STEPS or PANASONIC electric drive system, which has different levels of electric pedalling
assistance intensity that can be selected using a controller located on the handlebars. The electric
drive can also be switched off completely to preserve the function of a classic bicycle.
The KELLYS e-bike is an EPAC (Electrically Power Assisted Cycle) according to EN 15194 and differs from
a bicycle without an auxiliary drive. This electric drive helps when riding. The motor function is acti-
vated by pedalling. The maximum power of the EPAC bicycles is 250 W and the maximum speed of
an EPAC motor-assisted electric bicycle is 25 km/h. When this speed is exceeded, the motor assistance
automatically switches off. When the motor is switched off or the battery runs out, you can use the
e-bike as a conventional bicycle. All functions that depend on battery power, such as lights and elec-
tric shifting, will remain functional even if the motor is switched off or the battery goes into a "low"
state, but please note that this is an emergency mode and recharge the battery as soon as possible.
KELLYS e-bikes use 250 W motors because, according to the Road Traffic Order, this is the maximum
possible limit that meets the legislation for use in traffic on roads. KELLYS e-bikes can thus be used in
road traffic just like other bicycles.
In addition to pedalling support, the Kellys e-bike also has a Walking Assist function. This allows you to
put the e-bike in motion without pedalling, but only up to a maximum speed of 6 km/h. This function
is useful, for example, when pushing an e-bike with a load uphill.
Before riding in road traffic, familiarize yourself with the rules of the road, laws, orders and regulations
of the country in which you are currently using the KELLYS e-bike.
TO ENSURE SAFE RIDING
WARNING
While riding, concentrate on steering your e-bike, your surroundings and traffic. Do not use mobile
devices while riding. Watching and using the cycle computer can also distract you from your sur-
roundings, so only use it in places where you will not endanger yourself or others (at lower speeds
in open areas away from traffic), except when selecting the drive assist mode, which can be done
without letting go of the handlebars.
Before you start riding your e-bike, make sure the wheels, stem, handlebars, saddle and seatpost are
securely mounted on the e-bike. If the components are not fitted securely, the e-bike may fail during
operation and serious injury may result.
When riding an e-bike with electric assist, make sure you are fully familiar with the starting character-
istics of the e-bike before riding on roads with several lanes for vehicles and on pedestrian paths. If
the e-bike starts suddenly, this can lead to an accident.
Before riding at night, make sure your e-bike lights are working properly and make sure your lights
do not dazzle other road users.
WARNING
For safe riding, follow the instructions in the e-bike's instruction manual.
EN
OWNER'S MANUAL
1