Publicidad
KS — RT515 C/J
4. Removal of Main Parts
«Enclosure assembly Sections>
Mi Detaching the front panel unit
( See Fig.4 — 1)
Slide the Release switch in the direction of
arrow to detach the front panel unit.
i Removing the front chassis
( See Fig. 4~- 2,4-3)
1.Remove two ribs in the right side of unit .
2. Remove two ribs in the left side of unit and
pull the front chassis forward to remove it.
Wi Removing the heat sink ( See Fig.4 — 4)
1. Turn the left side unit.
2. Remove three screws ©) retaining the heat
sink.
Mi Removing the bottom cover
( See Fig. 4-5)
Turn the unit upside down then insert and turn
the screw driver to remove the bottom cover.
Slide in
the direction
of arrow
Detach it
Fig. 4-1
Front
:
chassis
Rid
Front
chassis
Rid
Heat sink
Fig. 4-4
(No. 49282) 27
Publicidad
