Publicidad
KS — RT515 C/J
m@ Head base (See Figs. 4-18 and 4-19)
1) Remove the cassette holder/sub chassis ass'y.
2) Remove the both right and left pinch rollers.
3) Remove the E washer © from the left shaft of the pinch roller.
4) Remove screw @ for the head base.
5) Turn the head base upside down, then remove the C washer
securing the collar which secures the FWD/REV plate (the
collar can also be removed.) (At this time, if the main belt is
gi How to assemble the cassette holder
and sub chassis
step1. How to Instal
removed, operation will be made easier.)
P
all the cach (K)
Install the catch(K) to the
Holer arm ass'y
holder arm ass'y .
m Flywheel ass'y (See Figs. 4~ 18 and 4-19)
1) Remove the cassette holder/sub chassis.
2) Remove the main belt.
3) Remove two C washers
© attached to the capstan shaft
(remove both the right and left washers).
Reel disk board ass'y (See Fig. 4-19)
1) Straighten the bent tabs @ holding the reel disk board.
2) Remove two screws @) fixing the reel disk board.
3) Remove the reel disk board.
m@ How to assemble the cassette holder and
sub chassis (See Figs. 4- 20 through 4- 23)
Fig. 4-20
Step 2. Assembling the holder arm ass'y and cassette holder ass'y.
Holder arm ass'y
When the holder arm ass'y
and cassete holder are assembly
(No. 49282) 31
Publicidad
