SICE S 63 E Manual De Instrucciones página 101

pressed.
The width can be set in millimetres by changing the setting of the unit of measurement in
the machine's set-up menu
- press the
(-d-)
- read the rated rim diameter value on the tyre
- modify the displayed diameter value by pressing the
number is set
- press the
entry (-A-)
- bring the distance measuring arm into contact with the inner side of the rim (fig.16).
- read the value of the distance between the wheel and the casing on the rule (A, fig.18).
- modify the displayed distance value by pressing the
number is set
- on completion, press
the new dimensions, or
WARNING
If the diameter and distance values between the two balancing planes, recalculated on a
Operator's Manual S 63 E - S 63 E C
key to confirm the previous value and set the machine for diameter entry
key to confirm the previous value and set the machine for distance data
to display the unbalance values recalculated on the basis of
to perform a wheel spin.
keys until the read
18
keys until the read
101