TOHATSU M 40D2 Manual Del Propietário página 32

30
INSTALLATION
mended can lead to poor performance of,
and/or damage to, the electrical system.
ENON00006-A1
Note
Recommended battery: 12V 70AH (800
Marine Cranking Amps (MCA) or 650 Cold
Cranking Amps (CCA)) Specifications and
features of batteries vary among the manu-
facturers. Consult the manufacturer for
details.
* The battery should be purchased sepa-
rately and is not supplied with the outboard
motor.
5
1. Place the battery box in a convenient
position away from possible water
spray. Securely fasten both the box
and the battery so they do not shake
loose.
2. Connect the positive lead (+) to the
positive terminal (+) of the battery, and
then connect the negative lead (—).
W h e n d i s c o n n e c t i n g t h e b a t t e r y
always remove the negative lead (—)
first. After connecting the positive ter-
minal (+), securely place a cap on it to
prevent short circuits.
1. Battery cord (red)
2. Battery cord (black)
2
1
ENOF00022-0