TOHATSU M 40D2 Manual Del Propietário página 42

40
PRE-OPERATING PREPARATIONS
Remedy
1.
Reduce the throttle to less than half
opening, and move to safe place
quickly, and stop the engine.
Check the propeller for bent or dam-
aged blades.
Consult an authorized dealer if engine
shows the same result even after
replacing propeller with new one.
2.
Move to safe place quickly, and set the
Remote Control Lever to Neutral
(buzzer will stop). And then, stop the
engine.
Check the engine oil level, and add
engine oil if necessary.
6
S t a r t t h e e n g i n e , a n d m o v e t h e
Remote Control Lever Forward care-
fully. Confirm that the indicator lamp
goes out.
3.
Move to safe place quickly, and check
the discharge of cooling water from the
water check port at idle speed and
stop engine.
Remove any foreign matter on the gear
case and propeller if necessary. Con-
sult an authorized dealer if no dis-
charge of cooling water.