Shallow Water Operation - TOHATSU M 40D2 Manual Del Propietário

58
ENGINE OPERATION
manual relief valve is not closed, the out-
board motor will tilt up when operated in
reverse.
ENOW00873-0
Before opening the manual relief valve,
make sure nobody is under the outboard
motor. If the outboard motor is in the tilted
up position, it will tilt down suddenly if the
manual relief valve is loosened in the "Man-
ual" direction.
7
1. POWER
2. MANUAL
ENOM00068-A

10.Shallow water operation

ENOW00051-0
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
WARNING
1
2
ENOF00070-1
WARNING
ENOW00053-0
CAUTION
While in shallow water drive position, do
not operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-0
CAUTION
Do not overtilt outboard motor when driv-
ing shallow water, or air may be sucked
through water inlet and sub-water inlet,
potentially leading to engine overheating.
2
1. Water inlet
2. Sub-water inlet
Manual tilt type
1. Shallow water running position:
Put the reverse lock lever in the tilt up
position, and tilt up the outboard motor
to put the outboard motor in the shal-
low water running position.
1
ENOF01144-0