TOHATSU M 40D2 Manual Del Propietário página 57

Manual Tilt type
1
2
1. Thrust rod
2. Higher
3. Lower
Power Tilt type
3 3
1
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment (Manual tilt
type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral.
3. Raise the outboard motor to the tilt up
position.
3
ENOF00674-A
2 2
ENOF00888-0
ENGINE OPERATION
4. Change the thrust rod position as fol-
lowing picture.
3
2
1. Push in
2. Rise the stopper
3. Pull out
5. Reinstall the thrust rod securely.
6. Gentry lower the outboard.
Trim angle adjustment (Power tilt
type)
The transom angle adjustment
1. Stop the engine
2. Operate the Power Tilt switch and
raise the outboard motor to the tilt up
position.
3. Lock the tilt with the Tilt stopper.
4. Change the trim lock pin position as
following picture.
1. Snap pin
2. Thrust rod
55
1
ENOF01238-1
2
2
1
1
ENOF01147-0
ENOF01147-0
7