TOHATSU M 40D2 Manual Del Propietário página 49

1. Remove the top cowl.
2. Remove starter lock cable from recoil
starter by loosing starter cable lock
screw.
3. Remove the bolts (3pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel and
wind the rope around the flywheel sev-
eral turns clockwise.
ENOF01345-0
5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
ENOF01959-0
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
to the stop switch, and attach the stop
ENOF01960-0
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
ENGINE OPERATION
ENOF01961-0
ENOF01915-0
CAUTION
47
7