Stopping The Engine - TOHATSU M 40D2 Manual Del Propietário

Forward
1. Quickly push the control lever to the
Forward (F) position 32°, where the
gear is connected, while lifting up on
the lock button located under the con-
trol lever grip.
2. Further forward motion will open the
throttle.
Reverse
1. Quickly pull the control lever to the
Reverse (R) position at 32°, where the
gear is connected, while lifting up on
the lock button located under the con-
trol lever grip.
2. Further rearward motion will open the
throttle.
Acceleration
ENOW00867-A
CAUTION
Sudden acceleration and deceleration may
cause passenger(s) to be thrown over-
board or falling down.
Open control lever gradually.
N
1
1. Control lever
2. Mine switch key
ENOM00049-A

6. Stopping the engine

ENOW00868-0
Be careful not to remove engine stop
switch lanyard from engine accidentally
while boat is running. Sudden stop of
engine can cause loss of steering control.
It can also cause loss of boat speed, possi-
bly leading the crew(s) and or objects on
the boat to be thrown forward due to iner-
tial force.
Tiller handle type
1. Turn the throttle grip to the slow posi-
1. Throttle grip
2. START position
3. Full closed
4. Full opened
2. Put the shift lever in the Neutral posi-
2
ENOF00881 1
3. Turn the main switch key to the OFF
ENGINE OPERATION
WARNING
tion.
4
1
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
position or push the stop switch. ( Do
not forget to turn the key off).
51
3
7
2
ENOF01908-0