ONLY
caution: Federal Law (USA) restricts this device to sale by or on the order of a physician.
1 Introduction
This user's manual describes how to use, maintain, and troubleshoot the LithoVue™ System (see Figure 1�1).
The LithoVue System is a software-controlled digital flexible ureteroscope system that consists of
the LithoVue System Workstation (Touch PC and Cart) and the LithoVue Single-Use Digital Flexible
Ureteroscope (sterile, single-use disposable). The LithoVue System Workstation is referred to as the System
Workstation, and the LithoVue Single-Use Digital Flexible Ureteroscope is referred to as the LithoVue
Flexscope in these instructions.
The LithoVue Flexscope connects to the System Workstation via the Flexscope Connector Cable Plug
Receptacle (hereafter referred to as Workstation Receptacle) on the front of the System Workstation
(see Figure 1�1).
The LithoVue System is designed to allow physicians to access, visualize, and perform procedures in
the urinary tract, using appropriate accessory devices (e.g., baskets, laser fibers, and forceps).
The LithoVue System is available in the configurations shown in table 1�1:
table 1�1 LithoVue System Available configurations
Model number (UPn)
M0067911000
M0067913500
M0067913600
User's Manual
description
LithoVue System Workstation Global
LithoVue Single-Use Digital Flexible Ureteroscope
(Standard Deflection) - Global
LithoVue Single-Use Digital Flexible Ureteroscope
(Reverse Deflection) - Global
5
Black (K) ∆E ≤5.0