Service And Warranty; 8�1 Limited Warranty; 8�2 Obtaining Warranty Service From Boston Scientific Corporation; Electromagnetic Compatibility (Emc) Requirements - Boston Scientific LithoVue Manual Del Usuario

If you experience any problems that cannot be resolved using the troubleshooting instructions above,
contact BSc using the information found in Section 8 "Service and Warranty" for service�

8 Service and Warranty

8�1 LIMItEd WArrAnty
Boston Scientific Corporation (BSC) warrants for one year from the date of purchase that reasonable
care has been used in the design and manufacture of this product. This warranty is in lieu of and excludes
all other warranties not expressly set forth herein, whether expressed or implied by operation of law or
otherwise, including, but not limited to, any implied warranties of merchantability or fitness for a particular
purpose. Handling, cleaning and storage of the product as well as other factors relating to the patient,
diagnosis, treatment, surgical procedures, and other matters beyond Boston Scientific Corporation's
control may directly affect the product and results obtained from it. Boston Scientific Corporation shall
repair or replace, at its option, any part of the product that Boston Scientific Corporation determines was
defective at time of shipment if notice thereof is received within one year of shipment. Boston Scientific
Corporation shall not be liable for any incidental or consequential loss, damage, or expense directly
or indirectly arising from the use of the product. Boston Scientific Corporation neither assumes, nor
authorizes any other person to assume for it, any other or additional liability or responsibility in connection
with the product. BSC assumes no liability with respect to product use by a non-qualified physician; use
contrary to documentation; use with a non-LithoVue catheter. Buyer shall be responsible for the ongoing
support and maintenance of the product not covered by this one-year warranty and after the one year
warranty period has expired. Buyer may, at its sole cost and expense, purchase an extended warranty
from Boston Scientific Corporation (BSC) to extend the term of this warranty.
8�2 oBtAInInG WArrAnty SErVIcE FroM BoSton ScIEntIFIc corPorAtIon
Contact the Customer Service Department at Boston Scientific Corporation at 800-949-6708 to report any
problem with the System Workstation and obtain a return authorization number, if required.
Return the System Workstation to Boston Scientific Corporation. All shipments to Boston Scientific
Corporation must be insured and safely and securely packaged, preferably in the original shipping carton,
and should include a letter explaining the problem. Reference the return authorization number.
All transportation and insurance charges and risk of loss are the responsibility of the customer and must
be prepaid. A purchase order must be issued to Boston Scientific Corporation to cover all transportation
and insurance charges for return shipment after service.
You will receive a return goods authorization (RGA) tracking number for the returning product. Write the
RGA number on the outside of the return packaging.

9 Electromagnetic compatibility (EMc) requirements

9�1 GUIdAncE And MAnUFActUrEr'S dEcLArAtIon-ELEctroMAGnEtIc EMISSIonS
The LithoVue™ System is intended for use in the electromagnetic environment specified below
(Table 9.1). You should ensure the operating environment meets these requirements before using the
System Workstation.
42 User's Manual
Black (K) ∆E ≤5.0