3�2 System Workstation Assembly; Assembling The Cart; Assembling The Cart Base And Cart Post - Boston Scientific LithoVue Manual Del Usuario

touch Pc Packaging:
• Touch PC
• Power Transformer
• ( 8) No. M4 x 10 mm pan-head Phillips Mounting Screws {(4) required for mounting the Touch PC to the
Touch PC Mounting Plate} Note: (4) extra Mounting Screws are provided
• DVI Cable
• LithoVue™ System Workstation User's Manual
cart Packaging:
• Cart Base with attached wheels
• C art Post
• Touch PC Mounting Plate
• C art Handle with (2) No. 10-32 x 9/16" Phillips-head screws pre-installed
• Power Transformer Bracket Kit containing:
- Power Supply Holder with Velcro straps and Clamping Block
- Cord Wrap Hook with Clamping Block
- (2) No. 10-32 x 9/16" Phillips-head screws
- Power cord strain relief kit containing: (1) nylon cable clamp, (1) #8 flat washer and
(1) 8-32 x 1/4" Phillips-head screw
• Hardware bag containing:
- (3) No. 10-32 x 9/16" flat-head Phillips screws (for Touch PC Mounting Plate)
- #2 Phillips-head Screwdriver
- 9/64" Hex Wrench (used to adjust Tilt Tension Adjustment Screws)
- 1/2" (13 mm) Socket Wrench
- (1) Manual Tilt Lexan Cover (optional - cover the screws on Touch PC Mounting Plate)
- (1) 5/16" flat washer, (1) 5/16" split lock washer and (1) 5/16"-18 x 1" Hex Head Cap Screw
3�2 SyStEM WorKStAtIon ASSEMBLy
cAUtIon: do not attempt to repair or alter any components/parts of the LithoVue System
Workstation� the LithoVue touch Pc contains no operator-serviceable components� All
repairs, upgrades and servicing are to be performed only by authorized Boston Scientific
service personnel� See Section 8 "Service and Warranty" for additional information�

Assembling the cart

Follow these steps to assemble the Cart:

Assembling the cart Base and cart Post

1. Remove the Cart components from the box. The Cart Post, Cart Base, Touch PC Mounting Plate,
Cart Handle, Power Transformer Bracket and hardware are all packaged separately within the
outer Cart Box.
2. Confirm that all components listed in Section 3.1, "System Workstation Components", are
included in the packaging and that the components are not damaged.
3. Insert the Cart Post into the Cart Base and lay the assembly on its side for access to the bottom of
the Cart Base.
12
Black (K) ∆E ≤5.0
User's Manual