Selecting The Interface Protocol - Fronius IG-TL Serie Manual De Instrucciones

Setting the
inverter number
(continued)
Selecting the
interface proto-
col
The inverter number flashes.
7. Press the 'Enter' key
The inverter number is applied. The
'Inverter Number' menu item is
displayed.
1. Select 'DATCOM' in the Setup menu
2. Press the 'Enter' key
3. Select the 'Protocol Type' parameter
4. Press the 'Enter' key to set the com-
munication transmission protocol
properties
The first setting for the 'Solar Net'
communication transmission protocol
is displayed.
7