General; Components Required - Fronius IG-TL Serie Manual De Instrucciones

System overview - up to 100 Inverters via an RS 232
Interface

General

-
-
-
Possible system layout
Components
-
required
-
-
-
-
-
-
Fronius IG
This system version is possible with all Fronius inverters
Fronius IG inverters can only be connected together via the RS 232 interface
Data communication is carried out via DATCOM components such as an interface
card and datalogger
NOTE You should only use the interface box for setting up the data network
when using a network of Fronius IG TL inverters. The interface card cannot be
connected to the Fronius IG TL.
FRONIUS IG 1
IN OUT
3rd Party Devi c e
Up to 100 Fronius inverters
1 com card per inverter - except for the Fronius IG TL
At least 1 interface card / interface box
Datalogger card / datalogger box / datalogger & interface
Patch cable (see chapter 'Data cables')
RS 232 interface cable
2 terminating plugs (supplied with the datalogger)
FRONIUS IG 2
18
FRONIUS IG 3
IN
OUT