The '0x37 - Get inverter status' command is used to query the current inverter status.
0x37 - Measured
value queries Get
inverter status
Query
Start Length Device / Option Number
Response:
Start Length Device / Option Number
Explanation of 'Inverter Status' byte:
Value
0x01
0x02
0x03
0x04
0x00
0x01
0 - 99
0x01
0x01
0 - 99
Meaning
Startup
Operation
Manual Standby
Failure
Command Checksum
0x37
Command Inverter Status
0x37
Explanation
The inverter is in the startup phase
The inverter is feeding power into the grid
The inverter has been set to standby mode
by a user action
The inverter is currently processing a state
51
Checksum