Fronius IG-TL Serie Manual De Instrucciones página 22

Setting the
inverter baud rate
(continued)
- 'Baud' is displayed
14. Use the 'Up' and 'Down' keys to select
'BAUD'
15. Confirm using the 'Enter' (5) key
- A value from 2400 to 19200 is
displayed
16. Use the 'Up' and 'Down' keys to select
a value for the baud rate
17. Confirm using the 'Enter' key
18. Exit the menu using the 'Esc' key
After you exit the menu structure, the
inverter will run a startup test.
'Start ' will be displayed during this time.
UP
16