General Hardware Data; Interface Card Easy Baud Rate; Getting Started - Fronius IG-TL Serie Manual De Instrucciones

General Hard- The 'Data' serial interface is designed for an RS 232 9-pin sub-D plug.
ware Data The pins on the 'Data' serial interface are assigned as follows:
Pin
3
2
5
4
Interface Card The Interface Card easy automatically detects the available interface speeds. Interface
easy baud rate speeds can be as follows:
-
-
-
-
-

Getting started

This system version only requires the installation of the Interface Card easy. After instal-
ling the card, you only have to connect the inverter to the 3rd party device (PC, etc.) to
use the interface protocol.
The installation of the Interface Card easy is described in the following section.
Signal designation
Transmit (TxD)
Receive (RxD)
Signal earth
Power supply
2400 Baud
4800 Baud
9600 Baud
14400 Baud
19200 Baud
Signal description
Transmit line
Receive line
GND zero reference point
An IFC easy provides a supply voltage
of: 5 - 6 V, 0.5 W
24