Fronius IG-TL Serie Manual De Instrucciones página 59

0x03 - Get date Available for:
time
Up to 100 INV
via RS 232
X
The '0x03 - Get date time' command provides the current time. It displays the current
time and date.
Important The time for the first inverter in the system is displayed for a system consis-
ting of Fronius IG TL inverters.
Query:
Start
Response:
Start Length Device / Option Number Command Day Month Year Hour Minute Second Checksum
(1)
0x04 - Get active Available for:
inverter
Up to 100 INV
via RS 232
X
The 'Get active inverter numbers' command shows which inverters are active in a
LocalNet ring. One byte is output for each inverter. The output byte corresponds to the
device number that is configured in the display.
The maximum size of the data field is 100 bytes.
The sender receives a frame of the network numbers of all active inverters in the ring as
a response. If two devices have the same network number, then this is output in an error
message.
Query:
Start Length Device / Option Number Command Checksum
Response:
Start Length Device / Option Number
1 INV via RS 232
(IFC easy)
-
Length Device / Option Number
0x00 0x00 ignore
0x06 0x00 ignore
1 byte
1 INV via RS 232
(IFC easy)
X
0x00 0x00 0x04
n 0x00
Up to 100 INV
via RS 422via
(IG Plus/CL)
-
Command Checksum
0x03
0x03
(1) (1) (1)
Up to 100 INV
via RS 422via
(IG Plus/CL)
X
0x04
Command Active inverters
0x04 (0 -100 bytes)
53
Up to 100 INV
RS 422 (IG TL)
X
(1) ( 1) (1)
Up to 100 INV
RS 422 (IG TL)
X
Checksum