P02 - Edita (Edit) - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

10.3 P02 - EDITA (EDIT)

Access the programming "P02 – EDITA (EDIT)" menu, image
10.3.a, and then select the device type that will be edited, and
press ENTER image 10.3.b.
Configure the apartment number in the second line (Apto.:0011),
and then select the Tower (BL.: A). Note that in the fourth line is
displayed the total of registered devices for that unit (TOT:00001),
image 10.3.c.
Pressing the AVANÇA key, will be displayed the device serial number in
the first line and the user identification in the third line, image 10.3.d.
Using the directional keys (↑ ↓), select the device to be edited through
the identification and/or serial number. Then press the ENTER key
twice to access the screen which will allow to change the device
parameters, image 10.3.e.
From this point, proceed as registering data for a new device,
changing only the information that is needed (consult the item 10.2.7).
NOTE: If you are in possession of the device to be edited, another
faster way to access the data is to follow the same procedure
described in the item 10.1.
Image 10.2.7.k
Image 10.2.7.n
Image 10.2.7.l
Image 10.2.7.o
Image 10.2.7.m
Image 10.3.a
Image 10.3.b
Image 10.3.c
Image 10.3.d
Image 10.3.e
English - 121
Português -
121