Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso página 133

GRUPO (Group)
The "Grupo - Group" option enable or disable the general use of user's groups, consult the
item 11.16.
PORTA ABERTA (Open Door)
The "Porta Aberta - Open Door" option enable or disable the visual and sound alerts in the
Guarita IP (consult Multifunção Receiver 4-A manual).
ESCRAVO (Slave)
Enable this option if two or more Guarita IP are used in the same CAN network, keeping
only one with the option disabled (the master one). Important only when there is Multifunção
Receiver 4A controlling biometrics (RS485) or Schedule groups.
PORTA ABRIU (Opened Door)
If this function is enabled, events will be generated (on-line and in memory) every time the
door sensors of the receivers are opened and / or closed. Consult the function compatibility
with the Integration Software used.
PORTA VIOLADA (Violated Door)
This option enables events and notifications (sound and visual) every time the door sensors
of the receivers are opened, without the pass of a valid device by the user.
11.8 A08 - RESTORE
The "A08 – Restore" function restores the stored data in a USB
Flash Drive or in the Guarita IP internal SD Card.
Use this option to recovery lost data and in cases of Guarita IP
replacement, to set its content to the new device.
ATTENTION!
All the Guarita IP information will be replaced after the restore
process!
To restore the data, access the "A08 – Restore" option, image
11.8.a, select PEN DRIVE (the device should be connected to the
Guarita IP) or SD CARD INTERNO (internal SD CARD), image
11.8.b, an then select the backup identified by date, hour or
condominium's name (described in the Guarita IP labels), image
11.8.c. Make sure to choose the right file and press ENTER to
apply the restore, image 11.8.d. Wait for the success confirmation
message, image 11.8.e, and then turn the programming key to the
"OFF" position, image 9.1.b.
Image 11.8.a
Image 11.8.b
Image 11.8.c
Image 11.8.d
Image 11.8.e
English - 133
Português -
133