Operation; Screen 1 (3Sec.) - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

Another example of installation is shown below, where are used both CAN connections
of Guarita IP.
Image 6.b
This another example shows a situation where there are more than one Guarita IP in the
same CAN network.
Image 6.c
In cases where there are more than a Guarita IP, it's possible connect them in the same CAN network.
NOTE: For this application, also read [12].

7. OPERATION

After installed and interconnected to the access devices receivers properly, it will display the
gate activation information received from a receiver, indicating alternately two screens for
15 seconds:

7.1 SCREEN 1 (3SEC.)

- Line 1: Apartment number and tower of the user;
- Line 2: According with the event, can indicate panic, low
battery or cloning;
- Line 3: Preprogrammed labels with function attributed to the
receiver with address from 1 to 8 and its respective relay output;
- Line 4: User name up to 18 characters.
Up to 1640ft
Up to 1640ft
Image 7.1.a
English - 114
Português -
114