Scope - SICK T4000 Compact Instrucciones De Servicio

1
Chapter
Note
132
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice
About this document
Hardware commissioning,
Fault, error diagnosis and troubleshooting,
Part numbers,
Conformity and approval.
The planning and use of protective devices such as
the T4000 Compact also require specific technical
skills that are not detailed in this document.
When operating the T4000 Compact, the national,
local and statutory rules and regulations must be
observed.
General information on the subject of safety tech-
nology is given in the guidelines "Safe Machinery".
We also refer you to the SICK homepage in the
Internet at:
http://www.sick.com
Here you will find information on:
sample applications,
a list of frequently asked questions regarding the
T4000 Compact.
1.4

Scope

These operating instructions apply to the safety
switch T4000 Compact from the date of
manufacture:
1007 xxxx
You will find the device's date of manufacture on
the type label in the field Date Code in the format
yywwxxxx (yy = year, ww = calender week,
xxxx = serial number).
This document is an original document.
Operating Instructions
T4000 Compact
8009212/TF93/2010-03-29