Scope; Abbreviations Used; Symbols Used - SICK Direct IN4000 Instrucciones De Servicio

Operating instructions
IN4000 Direct
OSSD
Recommen-
dation
Note
, ,
Take
action ...
WARNING
8012183/WI13/2013-01-15
Subject to change without notice
About this document
1.4

Scope

These operating instructions are original operating
instructions.
These operating instructions are applicable to the
IN4000 Direct non-contact safety switch.
1.5

Abbreviations used

Output signal switching device = signal output that
drives the safety circuit
1.6

Symbols used

Recommendations are designed to give you some
assistance in your decision-making process with
respect to a certain function or a technical measure.
Refer to notes for special features of the device.
LED symbols describe the state of a diagnostics LED.
Examples:
The LED is illuminated constantly.
The LED is flashing.
The LED is off.
Instructions for taking action are shown by an arrow.
Read carefully and follow the instructions for action.
Warning!
A warning notice indicates an actual or potential risk
or health hazard. They are designed to help you to
prevent accidents.
Read carefully and follow the warning notices!
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
GB
Chapter 1
151