Scope; Symbols Used - SICK T4000 Multi Instrucciones De Operación

1
Chapter
Note
Recommen-
dation
140
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice 8011036/TF94/2010-06-29
About this document
Part numbers,
Conformity and approval.
The planning and use of protective devices such as
the T4000 Multi also require specific technical skills
that are not detailed in this document.
When operating the T4000 Multi, the national, local
and statutory rules and regulations must be obser-
ved.
General information on the subject of safety tech-
nology is given in the guidelines "Safe Machinery".
We also refer you to the SICK homepage in the
Internet at:
http://www.sick.com
Here you will find information on:
sample applications,
a list of frequently asked questions regarding the
T4000 Multi.
1.4

Scope

These operating instructions apply to the safety
switch T4000 Multi from the date of manufacture:
1007 xxxx
You will find the device's date of manufacture on
the type label in the field Date Code in the format
yywwxxxx (yy = year, ww = calender week, xxxx =
serial number).
This document is an original document.
1.5

Symbols used

Recommendations are designed to give you some
assistance in your decision-making process with
respect to a certain function or a technical measure.
Operating instructions
T4000 Multi