Supply Condition; Packing, Handling, Receiving, Storage; Packing; Handling - brevini RDF159 Manual De Instalación Y Mantenimiento

3. SUPPLY CONDITION

The exterior of the gear units are painted with a
synthetic epoxy primer ("RAL 5010" blue), unless
otherwise indicated in the contracts. Such protection
can withstand normal industrial environments,
including outdoor sites, while additional synthetic
top coats can also be applied. If the machine will be
used under particularly aggressive environmental
conditions, special types of paints can also be
applied.
The machined external parts of the gear unit, such as
the ends of the hollow and non-hollow shafts, support
surfaces, spigots, etc. are protected with rust-inhibitor
oil (tectyl). The internal parts of the gear unit casings
and drives are also protected with rust-inhibitor oil.
All the gear units, unless otherwise indicated in the
contracts, are supplied without lubrication (as
indicated by a special adhesive sticker attached
to the gear unit to notify the user of such a supply
condition).
4. PACKING, HANDLING,
RECEIVING, STORAGE

4.1 Packing

Brevini Riduttori S.p.A. products are packed
and shipped in crates or on pallets, depending on
the specific case.
- All Brevini products, unless otherwise indicated in
the contracts, are packed with wrapping that can
withstand normal industrial environments.

4.2 Handling

Note: the weight reported on the nameplate must
be considered net of any accessories; therefore,
to obtain the overall weight of the gear unit +
accessories, a maximum indicative weight allowance
of about 15 Kg must also be considered.
To move packages, use lifting equipment that is
suitable for the type of packing and for which the
capacity is indicated on such equipment.
Do not tilt or turn the package upside down while
lifting or during transport.
www.comoso.com 26