Maintenance - ANTEO REP Serie Uso Y Mantenimiento

MAINTENANCE

Checks to be done
ANTEO tail lifts do not require special or complicated maintenance standards. These checks should be carried out in order to ensure reliability of the ANTEO product as for the safety
of operators and third parties. Time spent on these simple operations will make the tail lift more reliable thus prolonging its operational life.
If any of the components should present a defect or irregularity contact an Authorised Anteo Centre IMMEDIATELY.
Component
Anchoring to the frame, anchoring
to the crosspiece and anchoring of
the guide bars (if present).
Structural elements and platform
Pins and bushings
Hydraulic cylinders
Rigid hydraulic pipes
Flexible hydraulic hoses
Safety valves (on the cylinders)
Chrome plated parts
Component
132
MAINTENANCE
Checks to be done
ANTEO tail lifts do not require special or complicated maintenance standards. These checks should be carried out in order to ensure reliability of the ANTEO product as for the safety
of operators and third parties. Time spent on these simple operations will make the tail lift more reliable thus prolonging its operational life.
If any of the components should present a defect or irregularity contact an Authorised Anteo Centre IMMEDIATELY.
Component
Anchoring to the frame, anchoring
to the crosspiece and anchoring of
the guide bars (if present).
Structural elements and platform
Pins and bushings
Hydraulic cylinders
Rigid hydraulic pipes
Flexible hydraulic hoses
Safety valves (on the cylinders)
Chrome plated parts
Component
132
check method
check the correct tightening of the fastening screws and that the whole is intact (*).
visual check – to detect any failures, deformations, or cracks especially in the welds, joints and connections of the platform. During use
functional – apply force manually to all the joints to check for wear.
visual – to check for the presence and efficiency of the locking devices.
check that the extension parts of the rods are correctly tightened and intact.
visual – to check for oil leaks.
visual – to check for abrasions or oil leaks.
visual - to check for cracks, abrasions or oil leaks.
NOTE: in any case the flexible pipes must be completely replaced every three years (*).
functional– carry out any movement of lowering or downward rotation and check that movement stops immediately on
releasing the controls.
visual – to check for chromium-plating corrosion.
check method
check method
check the correct tightening of the fastening screws and that the whole is intact (*).
visual check – to detect any failures, deformations, or cracks especially in the welds, joints and connections of the platform. During use
functional – apply force manually to all the joints to check for wear.
visual – to check for the presence and efficiency of the locking devices.
check that the extension parts of the rods are correctly tightened and intact.
visual – to check for oil leaks.
visual – to check for abrasions or oil leaks.
visual - to check for cracks, abrasions or oil leaks.
NOTE: in any case the flexible pipes must be completely replaced every three years (*).
functional– carry out any movement of lowering or downward rotation and check that movement stops immediately on
releasing the controls.
visual – to check for chromium-plating corrosion.
check method
En
En
minimum frequency
Monthly
Monthly
Monthly
Monthly
Monthly
During use
Every three months
minimum frequency
minimum frequency
Monthly
Monthly
Monthly
Monthly
Monthly
During use
Every three months
minimum frequency