GASPARDO MTE Empleo Y Mantenimiento página 58

ENGLISH
3) From the Table of Longitudinal Seed Planting Distances
(Table 4):
- Look for the table that lists the couple of pinions equal to the
seed planter's one;
- Seek the value of the longitudinal seed planting distance previou-
sly calculated. Should there be two or more types of disks that
assure the same longitudinal seed planting distance, prefer
the disk with the largest number of holes.
- Move left and see on which pair of gears (A-B, Fig.26) to place
the gear chain;
4) About the Seed Planter:
- To move the chain ,open the gearbox cover and loosen the chain
(1 Fig. 26) by means of the lever (2);
- Place the chain on the located gears and align them (Fig. 27).
- Tighten the chain again with the lever (2 Fig. 26) and close the
cover.
- If the seed planting distance is not obtained with the pinions
(wheel C-D) fi tted on the planting unit (Fig. 25), check with the
table to see if they need to be replaced or have their positions
reversed.
58
USE AND MAINTENANCE
fi g. 26
fi g. 27

A
B
1
2
cod. G19503270