Warning Signs; Warning Signals; Danger Signals; Indicator Signals - GASPARDO MTE Empleo Y Mantenimiento

1.7 WARNING SIGNS

The signs described in Fig. 4 are reproduced on the machine. keep
them clean and replace them if they should come off or become
illegible. Carefully read each description and learn their meanings
by heart.

1.7.1 WARNING SIGNALS

1) Before operating, carefully read the instruction booklet.
2) Before carrying out maintenance, stop the machine and consult
the instruction booklet.

1.7.2 DANGER SIGNALS

3 Risk of inhaling harmful sub- stances. Wear a dust mask
4) Danger of getting squashed during opening. Keep at a safe
distance from the machine.
5) Danger of getting hooked by the Cardan shaft. Keep away
from moving parts.
6) Danger of getting trapped. Keep away from moving parts.
7) Danger of getting squashed during closure. Keep at a safe
distance from the machine.
13
14
7
4
2
14
5
fi g. 4
cod. G19503270
USE AND MAINTENANCE
8) When using anticryptogamic chemicals, use adequate protec-
9) High noise level. Use adequate acoustic protection.
10) Pipes with high pressure fl uids. Take care if fl exible pipes break
11) Before engaging the pto, check that the rpm rate is that pre-

1.7.3 INDICATOR SIGNALS

12) Wear safety clothing.
13) Signs the hooking points for lifting.
14) Greasing point.
14
9
13
11 10 1

tion.
as oil could spurt. Read the instruction manual.
scribed. Never exchange the 540 rpm rate for 1000 rpm.
8
3
ENGLISH
6
8
7
4
12
45