Use Instruction - GASPARDO MTE Empleo Y Mantenimiento

USE INSTRUCTION

In order to use correctly the toolbar of the planter, operate as
follows:
1) Verify the proper working of the hydraulic system of the planter,
only with the machine lifted up from the ground or lowered on
its own wheels and props, but with the seeding units on uplifted
position. Also in the fi eld, make sure the planter is lifted up
before opening or closing the telescopic toolbar.
2) Lubricate daily all sliding parts (tollbar sections, gears shafting,
etc...) and in any case after washing the planter.
3) Before operating the row marker device, which is mounted on
the toolbar, remember to unhook the two row marker arms and,
for your safety, to hook them before transporting. the planter
on the road.
cod. G19503270
USE AND MAINTENANCE
MTE300
MTE320
MTE300
A - D = 6 row 70 cm
B - E = 6 row 75 cm
C - F = 6 row 80 cm
fi g. 15

MTE320
G = 8 row 45 cm (*)
H = 6 row 70 cm
I = 7 row 60 cm (*)
L = 6 row 75 cm
M = 6 row 80 cm
(*) Before changing the inter row spacing, ple-
ase, get in touch with the Manufacturer.
ENGLISH
53