Telescopic Frame; Description Of Functioning - GASPARDO MTE Empleo Y Mantenimiento

ENGLISH

3.5 TELESCOPIC FRAME

The seeder is suitable only for the uses indicated. Any other
use different from that described in these instructions could
cause damage to the machine and represent a serious hazard
for the user.
Regular operation depends on the correct use and adequate
maintenance of the equipment. It is advisable therefore to observe
scrupulously what is described in order to prevent any inconve-
niences that could prejudicate proper operation and duration. It is
just as important to keep to what is described in this booklet since
the Manufacturer declines all responsibility due to negligence
and non-observance of these rules.
At any rate the Manufacturer is available to assure immediate and
accurate technical assistance and all that may be necessary for the
improved operation and better performance of the equipment.
Check that the quick hook-ups are coupled correctly; parts of the
system could get damaged if they are not.
ATTENTION
Oil escaping at high pressure can cause skin injury with the risk of
serious wounds and infection. Call a doctor immediately if such an
incident occurs. Therefore, the installation of hydraulic components
in the tractor driver's cab is strictly forbidden.
All the components of the system should be positioned carefully to
avoid parts being damage during use of the equipment.
fi g. 14
52
USE AND MAINTENANCE

3.5.1 DESCRIPTION OF FUNCTIONING

The frame of the machine allows the tubular beams, on which the
side seeding elements are carried, to be slid lengthways (Fig. 15).
The cylinders, operated by a hydraulic system, have the function
of opening and closing the frame.
In this way it is possible to choose the width of opening of the whole
frame in relation to the number of seeding elements present (Fig.
14) and to the sowing line spacing required, and it is also possible
to close the machine in such a way that its overall dimensions are
reduced suffi ciently for road travel.
Stay well away from the machine while the telescopic frame
is opening or closing.

DANGER
cod. G19503270