D C D R I V E S
D C D R I V E S
—
Drive composer PC tool
Drive composer entry
Drive composer entry PC tool is the
same version for AC and DC drive.
The tool can be downloaded free of
charge from ABB internet home page.
Drive composer entry include
following function:
Composer entry will be connected at
Control Panel USB port:
When starting Composer entry it is
important to set the correct comport.
See Drive composer entry Menue /
view / settings / serial port.
Please double check the automatic selection of comport of
control panel in your computer.
Commissioning assistant
The DCS880 commissioning assistant support easy and fast start up DC drive.
Parameter set in correct sequence, auto tunes are activated in correct sequence.
a. Name plate data
b. Autotuning field current controller
c. Autotuning armature current controller
d. First turning motor shaft
e. Speed feedback assistant (Tacho fine tuning not
available)
f. Autotuning speed controller
g. Field weakening assistant (only used when maximum
speed is higher than base speed)
h Make a back up
Start the wizard in
drive composer
Drive composer pro
The PCtool Drive composer pro offer professional
commissioning features:
• DCS880 commissioning assistants
• Compare parameter files and parameter sets
• Fast monitoring of signals
• One or more drive can be connected via Control panel USB
port (Panel bus) or via Ethernet port FENA-21
Control panel plus
door mounting kit
USB cable
PC with Drive
Composer pro
System info menue
With the menue system info the drive name and drive
internal clock can be set.
It is important for backup function and makes datalogger
handling very easy.
For basic commissioning press the Start button or select a
specific assistant:
Select specific
assistant & press Next
For more information about the drive composer,
parameters, faults and alarms press the Help button!
21
21
DCS880
DCS880
*
*
Panel bus, up to 32 drives
*
Plus code: +J428 (DPI-H01)
8. Field weakening controller
Next >
7. Speed controller
Next >
6. Speed feedback
Next >
5. First time motor tuning
Next >
4. Armature current controller
Next >
3. Field current controller
Next >
2. Standard I/O
Next >
1. Name plate data
CT_002_wizard_a.ai