Turning On & Off - Össur PROPRIO FOOT PSX01 Instrucciones De Uso

TURNING ON & OFF
To turn the device ON:
• Hold the power button for longer than second.
• Device emits ascending tones.
• Start-up sequence will initiate, shown on the LED Indicator Ring by a green pattern rotating clockwise from the
top.
• A single green light will then flash at top of LED Indicator Ring, showing the device is functional and ready to
use.
To turn the device OFF:
• Hold down power button for longer than seconds.
• Device emits descending tones and turns OFF.
ANKLE ALIGNMENT
The device can be adjusted to variable heel heights, optimizing ankle alignment. This ensures correct alignment of
the prosthesis, essential for proper function.
NOTE:
– Heel height adjustment range is –
– Ensure selected footwear allows free ankle motion.
– Remain aware of audio feedback.
ANKLE ALIGNMENT WITHOUT WEARING PROSTHESIS
Ankle Alignment is performed without the user wearing the device.
. Fit the device with suitable footwear and ensure free ankle motion.
. Place the device on a level surface; make sure device is fully-charged device turned ON.
. Initiate Ankle Alignment by pressing power button quickly twice successively.
. Initiation confirmed: the device will beep once, and a single white LED will light up on the LED Indicator Ring.
. Ankle Alignment in progress: LED Indicator Ring will light up white clockwise.
. The actuator will move prosthesis into a vertical position.
Ankle Alignment completed: if successful, the device will emit an ascending audio tone, and LED Indicator Ring will
flash white.
mm ( ") for a size , category device.
12