Warranty Certificate And Identification Form - Zhermack CYCLOPE Manual Del Usuario

10.2 WARRANTY CERTIFICATE AND
IDENTIFICATION FORM
1. With this document the Manufacturer certifies that the
product has been built correctly, top quality materials
have been used and all inspections necessary for
compliance with European Community Directives have
been performed. The product is covered by a warranty
period of 18 months from the date of delivery to the user.
Proof of this date is provided from the purchase document
and the copy of the identification form. These documents
must be shipped to the After-Sales Centre with the
equipment. Persons wishing to make use of the warranty
must inform of the fault within 8 days of its discovery for
the effects and purpose of art. 1495 of the Civil Code. The
warranty is limited to replacement or repair of individual
components or pieces with manufacturing defects and
does not cover costs related to transfer of technical staff,
transport, packaging etc. Breakdowns, faults or damage
deriving from poor maintenance, incorrect power supply,
negligence, inexperience and other causes not imputable
to the Manufacturer and parts subject to normal wear
are not covered by the warranty. The warranty does not
cover breakdowns caused by failure to carry out routine
maintenance due to customer negligence. This warranty
does not provide for any reimbursement for direct or
indirect damages of any kind caused to persons or objects
due to equipment inefficiency.
2. The warranty is automatically rendered null and
void whenever the equipment is repaired, modified
or tampered with by the purchaser or unauthorised
third parties. The liability for damage caused by faulty
products expires after 10 years from the date in which the
Manufacturer put the products on the market, after this
time it becomes the user's responsibility, as envisioned by
the 85/374/EEC Directive.
3. To have work carried out under warranty the purchaser
must only contact the dealer, Manufacturer-authorised
after-sales centres or the Manufacturer itself. The warranty
gives the right for free replacement of faulty parts. It does
not, however, give the right for replacement of the entire
equipment.
4. In the case of disputes regarding application of
the warranty, quality or conditions of the equipment
delivered, the purchaser cannot suspend or delay total
payment or payment of the instalments.
5. No reimbursement can be requested by the purchaser
for loss of production.
6. The warranty is rendered null and void if:
a. The equipment is damaged by a fall, exposure to fire,
spilt liquids, lightening, natural disasters or, however,
causes not imputable to manufacturing defects.
b. Incorrect installation.
c. Incorrect mains connection (incorrect power supply
nominal voltage) or suitable protection devices have
not been installed.
d. The serial number has been removed, cancelled or
altered.
7. The components to be replaced under warranty, must
be returned to Zhermack S.p.A. which will then send the
appropriate spare parts. Any changed parts that are not
returned will be charged.
cyclope
8. The Manufacturer and the Dental Deposit do not have
to supply replacement equipments during the repair
period.
9. For tax purposes spare parts will only be provided
under warranty where the relevant limitations set out in
the terms and conditions of the warranty are respected.
10. For any other eventuality not provided for by this
Warranty Certificate and the regulations, consult the
Italian Civil Code.
11. Invoices for labour, travel and call-out must be paid
on their receipt.
12. The manufacturer and the dealer will comply with all
data processing laws in force, including those relative to
safety measures and in compliance with the specifications
given in the data processing information sheet.
Equipment Model:
..................................................................................
Equipment Serial Number:
..................................................................................
Purchaser:
..................................................................................
Address:
..................................................................................
Town/Post Code:
..................................................................................
Tel:
..................................................................................
Tax Code/VAT Number:
..................................................................................
Dealer:
..................................................................................
Purchaser's Signature:
..................................................................................
The reference figures can be found on pages 3 and 4 of this manual.
IDENTIFICATION FORM
EN
23