Zhermack CYCLOPE Manual Del Usuario página 15

cyclope
Translation of the original operating instructions
1. INTRODUCTION
1.1 How to read and use the
Use an Maintenance Manual
1.2 Terms and symbols used
2. GENERAL INFORMATION
2.1 Liability
2.2 Warranty: general standards
2.3 Authorised staff
2.4 General safety provisions
3. DESCRIPTION OF THE EQUIPMENT
3.1 General description of the equipment
3.2 Description of the components
3.3 Identification data
4. TECHNICAL FEATURES
4.1 Technical features and functioning principle
4.2 Technical data
4.2.1 Standard supplies
4.2.2 Accessories available on request
4.2.3 Weight and overall clearance
5. TRANSPORT AND HANDLING
5.1 General warnings
5.2 Packaging and unpacking
5.3 Transport and handling
5.4 Disposal/Dismantling
6. INSTALLATION AND COMMISSIONING
6.1 Warnings and precautions
6.2 Accepted environmental conditions
6.3 Space necessary for use
6.3.1 Worktop
6.4 Power source connection
6.5 Start-up
6.6 Declared use
6.7 Non-declared and prohibited use
7. USING THE EQUIPMENT
7.1 General warnings
7.2 Using the tool heater
7.3 Calibrating the position sensors
7.4 Residual risks
8. MAINTENANCE
8.1 Cleaning the equipment
8.2 Routine maintenance
8.3 Extraordinary maintenance
8.4 Re-start after long period of inactivity
8.5 How to request after-sales assistance
9. DIAGNOSTICS
9.1 General warnings
9.2 Troubleshooting
10. ATTACHMENTS
10.1 CE Declaration of Conformity
10.2 Warranty certificate and Identification form
10.3 Technical intervention worksheet
The data given in this Manual can undergo variations without
forewarning.
The reference figures can be found on pages 3 and 4 of this manual.
INDEX
EN
15