en
44 | EPS 625 | Symbols used
1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word
Probability of
occurrence
DANGER
Immediate impend-
ing danger
WARNING
Possible impending
danger
CAUTION
Possible dangerous
situation
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
Attention
Warns about possible property damage.
!
Information
Practical hints and other
i
useful information.
1.
Multi-step
Instruction consisting of several steps.
2.
operation
One-step
Instruction consisting of one step.
e
operation
Intermediate
An instruction produces a visible inter-
result
mediate result.
Final result
There is a visible final result on com-
"
pletion of the instruction.
|
1 689 988 258
2017-05-30
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
WARNING - Danger of hands getting trapped
between rotating parts
¶
Never hold your hand anywhere near the
flywheel when the EPS 625 is in opera-
tion!
¶
Cover rotating parts.
WARNING - Risk of burning!
The test oil might be hot and can cause
burning.
¶
Allow the test oil to cool before proceed-
ing with maintenance tasks.
¶
Wear safety gloves
WARNING!
The tommy bar used to rotate the flywheel
R
L
by hand must not be left inserted in the
locating holes of the flywheel!
¶
Always remove the tommy bar before
starting the EPS 625!
Symbol
Description
Operate the machine only after connecting the
fuel injection pump.
Do not operate the machine without connecting
the fuel injection pump.
Ensure that the glass tubes do not hit the fix-
tures for the fuel injection pump while rotating
the swivel plate.
Wear safety goggles
Wear ear mufflers
Robert Bosch GmbH