Setting Motor Stop Distance - Roger Technology B70/2B Instrucciones Y Advertencias Para El Instalador

Setting motor stop distance

...
Select number of motors installed
1 motor.
2 motors.
Sensing edge NOT INSTALLED.
NC contact (normally closed). The door reverses only when opening.
Contact with 8k2 resistor. The door reverses only when opening.
NC contact (normally closed). The door always reverses.
Contact with 8k2 resistor. The door always reverses.
STEP MODE.
PARTIAL OPENING
OPENING
CLOSING.
STOP.
Courtesy light. The output COR is managed from the remote control. The light remains lit as long as
the remote control is active. The parameter
Courtesy light in step mode (PP). The output COR is managed from the remote control.
The remote control turns the courtesy light on and off. The parameter
(1)
•
pressing CHB on the remote control. Press CHB to activate partial opening.
Selecting courtesy light mode
Disabled.
ACTIVE. The light remains lit for the entire duration of the manoeuvre.
From 3 to 90 s. The light remains lit for the time period set after the manoeuvre is completed.
From 2 to 9 minutes. The light remains lit for the time period set after the manoeuvre is completed.
60
COS
(1)
(1)
(1)
and
is ignored.
(1)
is ignored.