Installation; Installation Instructions; Electrical Connection - Franke CR 981 M M Manual De Instrucciones

Always contact qualified personnel in the following cases:
– installation (according to the manufacturer's instructions);
– doubts regarding appliance operation;
– replacing the socket if incompatible with the appliance plug.
Contact service centres authorised by the manufacturer in the following cases:
– immediately after unpacking, in case of doubts about appliance integrity;
– replacing or damage to the power cable;
– malfunction or poor operation; always demand original spare parts.
Important:
– only use the appliance to cook food;
– disconnect the appliance from the power supply before any cleaning or maintenance or in case of malfunction;
– use oven gloves when placing containers in the oven or removing them;
– since the end of the door handle may be hotter due to exiting hot air, always grip it in the middle;
– always make sure the control knobs are in the off position when the oven is not in use;
– if the oven is no longer to be used, disconnect it from the power supply;

Installation

Important: Installation must comply with the current standards and regulations. It must be only be carried out by
specialised and licensed personnel.
Cabinet requirements
For fitted units, the components (plastic materials and veneered wood) must be assembled with heat-resistant adhesives
(max. 100 °C): unsuitable materials and adhesives can result in warping and ungluing. The cabinet must allow sufficient
room for the electrical connections. The cabinet in which the oven in fitted must be strong enough to take the weight of
the equipment.
The oven must be securely fitted in the recess. The oven can be installed in a column unit or under the top of a modular
unit, provided sufficient ventilation is guaranteed (see Fig. 6 depending on the model).

Installation instructions

Fit the appliance in the compartment; fix the oven to the cabinet with the 4 screws supplied, using the holes prepared in
the sides.
If the oven is to be fitted under a cooking hob, firstly turn the hob connection (R) to the right or left so that the oven fits
properly (see Fig. 6a-Fig. 6b).

Electrical connection

The FRANKE oven is supplied with a three-core power cable with free terminals.
If the oven is permanently connected to the power supply install a device that ensures disconnection from the power
supply, with a contact opening distance enabling complete disconnection in category III overvoltage conditions Make sure:
a) the plug and socket are suitable for a 16 A current;
b) both can be easily reached and are positioned so that no live part is accessible when
inserting or removing the plug;
c) the plug can be easily inserted;
d) the oven does not rest against the plug when installed in the cabinet;
e) the terminals of two appliances are not connected to the same plug;
2
f) a 3 x 1.5 mm cable type H05VV-F is used when replacing the power cable;
g) the connection polarities of the free terminals are respected
(Brown=Line Blue=Neutral Yellow/Green=Earth).
NB: Make sure the characteristics of the household electrical system (voltage, maximum power and current)
are compatible with those of your FRANKE oven.
NB: If the power cable is damaged, it must be replaced by the manufacturer or its after-sales service or else by a person
with similar qualifications, in order to avoid any risks.
All manuals and user guides at all-guides.com
BLUE
YELLOW-GREEN
BROWN
25
en