Tuner - Teac DR-L700 Manual Del Usuario

1 4 3
1
2
3
4
106
1
3
2
4
1 Select TUNER by turning the FUNCTION knob (or
2
press the TUNER button of the remote control unit).
2 Select AM or FM by pressing the BAND button.
3 If "PRESET" indicator is lit, press the TUNING MODE
button to select the manual tuning mode.
The "PRESET" indicator disappears from the display.
This button is used to change the tuning mode.
4 Select the station you want to listen to (auto
selection).
Hold down the TUNING/PRESET button for 0.5 to 2
seconds.
When a station is tuned in, the tuning process will
stop automatically.
If you want to stop the tuning process, press the
TUNING/PRESET button.
Selecting stations which cannot be tuned
automatically (manual selection)
When the TUNING/PRESET button is pressed
momentarily (0.5 second or less), the frequency
changes by a fixed step.
FM : 50 kHz steps / AM : 9 kHz steps
Press the TUNING button repeatedly until the station
you want to listen to is found.
< "STEREO" is displayed when a stereo broadcast is
tuned in.
< "Tuned" is displayed when a broadcast is correctly
tuned in.
FM MODE Button
Pressing this button alternates between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and
the STEREO indicator lights in the display.
Mono
To compensate for weak FM stereo reception,
select this mode. Reception will now be forced
monaural, reducing unwanted noise.

Tuner

ENGLISH