Resume Playback - Teac DR-L700 Manual Del Usuario

DVD
POWER
FUNCTION
68
OPEN/CLOSE
STOP

Resume Playback

To stop and resume playback of DVD
If you press the STOP button during playback of DVD,
"RESUME" briefly appears on the screen, and the unit
enters RESUME mode.
If you want to cancel the RESUME mode and stop
playback completely, press the STOP button again.
How to resume playback
During playback of DVD, press the STOP button at
the point where you want to interrupt playback.
"RESUME" briefly appears on the screen, and the
time counter of the front panel display stops.
Press the PLAY button to start playback from the
interrupted point.
During playback of DVD, press one of the following
buttons at the point where you want to interrupt
playback :
POWER, OPEN/CLOSE,
FUNCTION (MD/CD-R, TAPE, AUX, TUNER)
When you turn the unit on or load the disc next time,
"RESUME DISC FROM LAST POSITION ?" appears on
the screen. Within 10 seconds, select YES or NO by
pressing the g /t and ENTER buttons.
If you select YES, playback will start from the point
where you interrupted playback last time.
< Up to 7 latest discs can be memorized.
< If the STOP button is pressed in the stop mode,
resume function will be cancelled and all the
memorized points will be cleared.
< This function may not work with some discs.
ENGLISH
or