Cuisinart FP1300BE Manual De Instrucciones página 22

on page 181). No repair must be attempted by the consumer.
• Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning
• CAUTION: TAKE CARE WHEN HANDLING THE SHARP
CUTTING BLADES, EMPTYING THE BOWLS AND DURING
CLEANING. DO NOT TOUCH METAL BLADES OR CUTTING
EDGES OF DISCS. ALL ARE EXTREMELY SHARP AND
CONTACT COULD CAUSE INJURY.
• WARNING: Use extra care when working with hot liquids
to avoid injury from overflowing, sudden steaming and
splattering. In order to avoid scalds from steam it may be
advisable to process smaller quantities on a low speed.
• Always inspect the appliance and appliance accessories before
use for noticeable signs of damage. Do not use if damaged, or
if the appliance has been dropped. In the event of damage, or if
the appliance develops a fault, contact the Cuisinart Customer
Care Line (see "International guarantee" on page 181).
• Never pull the plug out of the mains socket by the supply cord.
• Do not wrap the supply cord around the main body of the
appliance during or after use.
• Always ensure the voltage to be used corresponds with the
voltage on the appliance; this is indicated on the bottom of
the housing.
• Do not leave the supply cord hanging over the edge of a
kitchen table or worktop.
• Avoid contact between the supply cord and hot surfaces.
• Always ensure that your hands are dry before removing the
plug from the mains outlet.
• Never place the blade or disc directly on the motor of the
housing base. Always ensure the correctly associated work
bowl is in place.
• Before switching on the processor, ensure that the blade is
22