Error Handling And Troubleshooting - Menzer VCL 320 Traducción De Instrucciones Originales

MENZER MENZER MENZER MENZER
7. Error handling and troubleshooting
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
Problem Possible causes
MENZER MENZER MENZER MENZER
• The machine is • Mains plug is incorrectly inserted into
without function or the mains socket.
malfunctioning.
MENZER MENZER MENZER MENZER
• Device switched off.
• Defective mains plug.
MENZER MENZER MENZER MENZER
• Defective power cable.
MENZER MENZER MENZER MENZER
• Defective On/Off switch.
• Defective motor.
MENZER MENZER MENZER MENZER
• Mains fuse was tripped.
MENZER MENZER MENZER MENZER
• Power cut.
MENZER MENZER MENZER MENZER
• Insufficient, • Suction nozzles, extension tube, elbow
decreasing or no piece and/or suction hose clogged.
vacuuming power.
MENZER MENZER MENZER MENZER • Cartridge filter clogged.
MENZER MENZER MENZER MENZER
• Fleece filter bag is full.
MENZER MENZER MENZER MENZER
• Kink in the extractor hose.
• Device is not correctly closed.
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
• Liquid fill level too high; float closes
suction channel.
MENZER MENZER MENZER MENZER
• No improvement after cleaning.
• Semi-automatic 'Filter Refresh' filter
MENZER MENZER MENZER MENZER
cleaning function defective.
MENZER MENZER MENZER MENZER • The device • Suction nozzles, suction tube, elbow
switches off during joint and/or suction hose clogged.
operation.
MENZER MENZER MENZER MENZER • Cartridge filter clogged.
MENZER MENZER MENZER MENZER
• Fleece filter bag is full.
MENZER MENZER MENZER MENZER
• Liquid fill level too high.
• No improvement after cleaning.
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
14 GB
Correction
• Check the plug connection; insert the
mains plug correctly into the mains
socket.
• Switch on device.
• Contact MENZER repair service.
• Check mains fuse.
• Clean extraction system and remove
any clogging.
• Check cartridge filter, rinse gently or
replace as needed and ensure correct
seating.
• Check fleece filter bag, replace as
needed and ensure correct seating.
• Remove kink.
• Close device correctly and position all
housing parts, the cartridge filter and
fleece filter bag correctly.
• Empty all liquid from container.
• Contact MENZER repair service.
• Clean extraction system and remove
any clogging.
• Check cartridge filter and replace
as needed while checking for correct
seating.
• Check fleece filter bag, replace as
needed and ensure correct seating.
• Empty all liquid from container.
• Contact MENZER repair service.
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
Problem Possible causes
MENZER MENZER MENZER MENZER
• Dust is emanating • Cartridge filter clogged.
from the device dur-
ing operation. • Cartridge filter is defective or incor-
MENZER MENZER MENZER MENZER rectly installed.
• Fleece filter bag is full.
MENZER MENZER MENZER MENZER
• Fleece filter bag is torn.
• Fleece filter bag is incorrectly installed.
MENZER MENZER MENZER MENZER
• Device is not correctly closed.
MENZER MENZER MENZER MENZER
• Defective or missing housing flange.
MENZER MENZER MENZER MENZER
• Automatic activa- • Power tool/add-on device defective or
MENZER MENZER MENZER MENZER
tion not responding. incorrectly attached.
MENZER MENZER MENZER MENZER
• Power tool/add-on device has incor-
rect power connection values and
doesn't fit power socket.
MENZER MENZER MENZER MENZER
• Insufficient power intake of the power
tool.
MENZER MENZER MENZER MENZER
• Defective power socket.
MENZER MENZER MENZER MENZER
• Defective On/Off switch.
MENZER MENZER MENZER MENZER
• Semi-automatic • Cartridge filter clogged.
'Filter Refresh' func-
tion not responding. • Cartridge filter is defective or incor-
MENZER MENZER MENZER MENZER
rectly installed.
• Mechanical defect.
MENZER MENZER MENZER MENZER
• Semi-automatic • Cartridge filter clogged.
'Filter Refresh' func-
MENZER MENZER MENZER MENZER
tion not deactivat-
ing.
• Hose end or hose connector was not
MENZER MENZER MENZER MENZER
held closed.
MENZER MENZER MENZER MENZER
• Mechanical defect
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
Correction
• Check cartridge filter and replace
as needed while checking for correct
seating.
• Check fleece filter bag, replace as
needed and ensure correct seating.
• Close device correctly and position all
housing parts, the cartridge filter and
fleece filter bag correctly.
• Contact MENZER repair service.
• Connect the power tool/add-on device
correctly and/or check for correct
function.
• Connect power tool/add-on device
with correct connection values to the
power socket.
• Please note min. power intake of the
power tool to be connected P>30 W!
• Contact MENZER repair service.
• Check cartridge filter and replace
as needed while checking for correct
seating.
• Contact MENZER repair service.
• Check cartridge filter and replace
as needed while checking for correct
seating.
• The hose connector or hose end must
be held closed while pushing the Filter
Refresh button
• Contact MENZER repair service.
GB 15