Descargar Imprimir esta página

DeLonghi La Specialista ARTE Manual página 22

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
Auto-off
Water
hardness
3. Save the new settings by pressing OK (B6)
Please note: The appliance exits the settings menu automati-
cally if there is no activity for 30 seconds.
8.1
Reset default settings
1. Access the menu:
Press together and hold for
3 seconds
2. Reset to default values
Press and hold the steam
button (B9) for 3 seconds.
The OK light (B6) blinks briefly to confirm the reset.
9. CLEANING THE APPLIANCE
Important!
Do not use solvents, abrasive detergents or alcohol to clean
the coffee machine.
Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
Should the machine remain idle for more than a week, it
is advisable to carry out a rinse cycle before preparing any
drinks.
➡ 9
The indicator
minutes
light corre-
sponding to
➡ 1.5
the setting
currently
selected
comes on
➡ 3
The indicator
light corre-
sponding to
the setting
medium
currently
selected
comes on
/very hard
+
Danger!
Never immerse the coffee maker in water when cleaning: it
is an electrical appliance.
Before commencing any cleaning operation on the outside
of the machine, turn it off, unplug it from the mains socket
and wait for it to cool down.
hours
hours
soft
water
10. CLEANING THE COFFEE MILL
1. Clean the attachment area with the brush (C9) (fig. 29).
2. Use the brush to clean the coffee guide (fig. 30).
Efficient grinding
The burrs are subject to wear over time. As time goes by, to
achieve the perfect quantity, you need to turn the dial (B4)
towards the highest numbers. When you reach a setting of be-
tween 30 and 40, you need to set the extra grinding range (see
section "8. Settings menu" - "Extra grinding range").
When the quantity of ground coffee becomes less than expect-
ed, contact a service centre to have the burrs replaced. With the
new burrs fitted, adjust the coffee mill by accessing the settings
menu and selecting the first range of the "extra grinding adjust-
22

Publicidad

loading

Este manual también es adecuado para:

Ec9255