14. EXPLANATION OF INDICATOR LIGHTS
LIGHTS
All lights blink briefly
Permanently alight
Blinking
+
-
Permanently alight
(The indicators
the respective selections)
+
-
Permanently alight
(The
indicator shows the
selection in progress)
Permanently alight
Blinking
Permanently
alight
EXPLANATION
LIGHTS
Turning the appliance on
The machine has been turned on for the
first time and the water circuit must be
filled
The machine is warming up
The machine is ready for delivery
and
show
The machine is ready for delivery
There is not enough water in the tank (A7)
or the tank is not correctly in place
An attempt is being made to deliver a bev-
erage, but with water tank (A7) empty
Because the beans are too finely
ground, the coffee is delivered too
slowly or not at all
The coffee filter (C3) or (C4) is
obstructed
The tank (A7) is not properly in place
and the relative valves are not open
Limescale in the water circuit
1 cup preparation is selected
OF
INDICATOR
OPERATION
Self-diagnosis
Proceed as indicated in section "3. Setting up
the appliance"
Wait until the ideal delivery temperature has
been reached
Set up the machine and proceed with prepa-
ration of the drink
Set up the machine and proceed with prepa-
ration of the drink
Fill the tank with water, or remove the tank
and reposition it correctly
Fill the tank with water
Remove the filter holder (C1) and repeat the
coffee-making steps, bearing in mind the
indications given in sections "4.1 Step 1 -
Grinding" and "4.2 Step 2 - Tamping"
Rinse the filters under running water
Press down lightly on the tank to open the
valves
Descale as described in section "13.
Descaling"
The entire preparation procedure (from
grinding to delivery) is set to make 1 cup
25
→