Publicidad
Idiomas disponibles
Idiomas disponibles
4 Product description
4 Product description
4.1 Assembly and use
The device is a component of a MIG/MAG welding system.
Welding fumes that are hazardous to health are generated when welding. These are extracted by the fume
extraction torch, fed through the extraction device's hose system, and filtered and cleaned by the internal
filters. The cleaned air is then returned via an air exhaust louver. The device complies with welding fume
separation class H12.
The device is operated using a control box. All electronic components are installed in the metal housing.
The power supply is provided via a separate connecting cable. The following accessories can be connected
to the welding power source:
— xFUME
4.1.1 xFUME POWER 350 design
Fig. 3
A Main switch
B Shielding gas connection
C Power cable
D Shielding gas cylinder shelf
E Control box
F Euro connector socket
K
J
I
H
EN - 12
®
®
PRO/ xFUME
COMPACT fume extraction torch
xFUME POWER 350 design
xFUME POWER 350
G Extraction device control elements
H Exhaust gas hose connector
I Negative earth cable socket
J Connection for torch UP/DOWN
K Positive earth cable socket
E
F
G
A
B
C
D
Publicidad
