Descargar Imprimir esta página

Abicor Binzel xFUME POWER 350 Manual De Instrucciones Original página 86

Publicidad

Idiomas disponibles

Idiomas disponibles

11 Disassembly
11 Disassembly
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can start running
unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
Disconnect the power supply.
1
Disconnect all supply connections.
2
Disconnect the welding torch cable assembly from the euro connector socket and the extraction hose
3
connector.
Disconnect the electrode holder and earth cables.
4
Remove the wire mandrel.
5
12 Disposal
12.1 Disposal of welding dust
All welding dust collected must be disposed of in accordance with local regulations.
12.2 Disposal of materials
This product is mainly made of metallic materials that can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labeled in preparation for their sorting and
separation for later recycling.
12.3 Disposal of consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the
consumables' manufacturer.
► Observe the relevant local regulations and disposal instructions in the safety data sheets specified by
the manufacturer of the consumables.
12.4 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
EN - 40
CAUTION
Equipment marked with this symbol is covered by European Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE).
► Do not dispose of electrical devices with household waste.
► Disassemble electrical devices to enable proper disposal.
 11 Disassembly on page EN-40
► Collect electrical equipment components separately and recycle in an
environmentally responsible manner.
► Observe local regulations, laws, provisions, standards, and directives.
► Please consult the relevant local authority for information about the collection and
return of waste electrical equipment.
xFUME POWER 350

Publicidad

loading