ENGLISH
To change the setting during procedure
Press the DISPLAY button, then return to step 1.
To cancel the timer standby mode
1
Press the DISPLAY button so that the timer mode
(every or once) to be cancelled is displayed.
2 Press the TIMER STANDBY button so that the "@"
indicator disappears.
To restore the timer operation, press the TIMER STAND-
BY button again so that the "G)" indicator is displayed.
To confirm the contents of the preset timer
1
Press the DISPLAY
button so that the timer mode
(every or once) to be confirmed is displayed.
2
If the "©"
indicator
is not displayed,
press
the
TIMER STANDBY button.
3
Press the SET/IMEMORY button.
When this button is pressed repeatedly, ON time,
OFF time and the station frequency are displayed in
this order.
To change the contents after setting is completed
1
Make the contents to be changed displayed, follow-
ing "To confirm the contents of the preset timer".
2
Press the TIMER STANDBY button so that the "@"
indicator disappears.
3
Press the SET/IMEMORY
button, and change the
contents.
Notes
@ When
setting the timer, the FM mode, stereo or
monaural, cannot be selected.
@ The contents of the preset timer being operated can-
not be changed.
®
The timer does not operate if the "@" indicator is
not displayed. .
@
If the timer ON
time is reached
while program
source other than tuner is being played or recorded,
the function
mode
automatically
switches
to the
tuner. When you do not use the timer, be sure to
press the TIMER STANDBY button so that the "©"
indicator disappears.
88
Other method of timer setting
You can preset "ON" timer or "ON/OFF" timer only.
This function is convenient for listening to tapes or
compact discs.
To set only ON timer
After steps 1-2 of "Setting procedure" on page 86, press
the TIMER STANDBY button.
The timer operation begins at the preset ON time.
To turn off the power, press the POWER button of the
tuner.
;
To set only ON/OFF timer
After steps 1-4 of "Setting procedure" on page 86, press
the TIMER STANDBY button.
The timer operation begins at the preset ON time and
the power is turned off at the OFF time.
@ When the system is turned on by the timer, the func-
tion
previously
selected
will
be
automatically
selected.
@ When the ON time is reached while you are listening
to sources
other
than
the
tuner,
the
funtion
automatically Switches to the tuner.
DEUTSCH
Korrektur
der Timer-Programmierung
wahrend
des
Programmierbetriebs
Draicken
Sie
die
DISPLAY-Taste
und
beginnen
Sie
erneut mit Schritt 1.
Zum Abschalten der Timer-Betriebsbereitschaft
2
Dricken Sie die TIMER STANDBY-Taste, so daB die
@-Anzeige verschwindet.
Durch erneutes Driicken der TIMER STANDBY-Taste
kann der Timer wieder aktiviert werden (die @-Anzeige
erscheint wieder).
Uberpriifung der Timer-Programmierung
Wahlen
Sie
mit der
DISPLAY-Taste
die Timer-
Betriebsart
(EVERY oder ONCE), deren
Program-
mierung Gberprift werden soll.
3
Drucken Sie die SET/MEMORY-Taste.
Durch wiederholtes Driicken dieser Taste erscheint
nacheinander die Einschailtzeit, die Abschaltzeit und
die Senderfrequenz.
Programmiervorgang
2
Dricken Sie die TIMER STANDBY-Taste, so daB die
@-Anzeige verschwindet.
3
Driicken Sie die SET/MEMORY-Taste und korrigieren
Sie die Daten.
Hinweise
mierung nicht mehr geandert werden.
@
Der Timer arbeitet nur, wenn
die @-Anzeige zu
sehen ist.