Publicidad
Figure 102. Leader pin in the incorrect and correct positions
To reposition the leader pin:
Procedure
1. Slide open the cartridge door
need to shake the cartridge gently to roll the pin toward the door).
2. With plastic or blunt-end tweezers, grasp the leader pin and position it in the pin-retaining spring clips
3 .
3. Press the leader pin gently into the clips until it snaps into place and is firmly seated.
4. Close the cartridge door.
Figure 103. Placing the dislodged leader pin into the correct position
5. To rewind the tape, insert the cartridge manual rewind tool
cartridge 's hub
230 IBM TS4300 Tape Library Tipo de máquina 3555: Guía del usuario
( 1
in Figure 103 on page 230) and locate the leader pin
2
and turn it clockwise until the tape becomes taut.
( 1
in Figure 104 on page 231) into the
IBM Confidential
2
(you might
Publicidad
