(o-
Cii=
[maven] |
FOCUS
WHITE BAL
CAMERA RECORDING
HOW TO RECORD
Hold the camera recorder as in the illustration.
(11)
[1] Set the POWER switch to CAMERA, and
insert a cassette.
[2] Set the following switches to the standard
position for automatic adjustment. [1:3 |
*® FOCUS switch > AUTO. (auto focusing)
e WHITE BAL switch ~ AUTO. (linear auto
white balance adjustment).
[3] START recording.
1 Slide the STANDBY switch up.
The unit will enter the recording pause mode.
2 Press the START/STOP button.
Recording will start.
To stop recording, press the START/STOP button
again.
The unit will enter the recording pause mode.
After using, slide the STANDBY switch down
and set the POWER switch to OFF.
When shooting from a low angle
Raise the viewfinder.
To check the last portion of the previous
recording
Press the REC REVIEW button.
The last few seconds of the recorded portion are rewound
and then the recorded picture is monitored on the viewfinder
screen, The unit then enters the recording pause mode.
Check on the viewfinder screen
STBY: Displayed during recording pause mode.
REC: Displayed during recording.
Note
If you leave the unit in the recording pause mode for
7 minutes or more, the unit will be automatically
turned off. To resume recording, slide the STANDBY
switch down once and slide it up again.