Publicidad
38
ZOOMING E!)
The size of the subject in the scene can be
changed.
Turn the zoom lever to the right for telephoto,
and turn it to the left for wide-angle.
You can obtain more zooming efects by using an optional
conversion lens (VCL-1546 or VCL-0746). Auto focusing,
however, will not function in that case.
CLOSE-UPS (MACRO) [a1
Even tiny objects can literally fill the screen for
dramatic close-up effects.
1 Set the FOCUS switch to MAN.
2 Set the WHITE BAL switch to #: or .*: .
3 Turn the zoom lever to the left for MACRO
position, holding down the green macro set
button.
4 Bring the recorder as close as necessary to
obtain the desired subject size.
The subject can be as close as approximately
90 mm (348 in.) from the lens surface.
5 Turn the zoom lever within the MACRO range to
focus sharpy.
Notes
¢ Auto focusing or linear auto white balance
adjustment does not function properly in macro
shooting.
¢ If the subject is closer than 90 mm, it cannot be
brought into focus.
¢ When shooting in macro, the depth of field is very
shallow, so pay attention to focus. To keep the
subject in focus, use a tripod or monopod.
* Zooming is not possible during macro recording.
To change the size of the subject, move the
camera recorder closer or further away.
Publicidad
